Manualshelf

Firmware Update - Release Notes

ManualsBrandsSennheiser ManualsPro AudioDual-Channel Slot-Mount Wireless Receiver
12
RN 1173 v1.5.1 - EK 6042 Firmware Update | 2/2
EK 6042 Firmware
Release Notes
EK 6042 Firmware version 1.3.1
What‘s new?
This firmware update will provide EK users with a „Party Dial“ mode.
This mode will allow users to quickly jump between pre-programmed frequencies with just one
press of a button. Ideal for use cases where it is necessary to quickly change between frequencies.
Preparation:
The „Party Dial“ uses frequencies from the „License List“.
If there are no frequencies placed in the “Licence list”, you will need to program a minimum of two
frequencies into the “Licence list” which fit to the selected transmitter profile.
To carry out this step, please use the EK6042 pre-configuration web interface.
Frequencies that are outside the range of the transmitter profile used will be ignored in party dial
and can therefore not be selected.
Firmware-Installation
1. Connect the EK6042 to a PC/Mac using a USB cable
2. Start the EK6042 webinterface in a browser
3. Choose „Firmware update“ on the maintenance page and select this file
Notes:
The party dial mode is a dedicated working mode. Only the frequency (license list pre-set) of CH1 or
CH2 can be changed.
f The buttons of the EK are assigned dedicated party dial functionality, for all system- or channel
settings or to use the EK in a standard mode you will need to leave the party dial mode.
How to use:
f Press the to enter „System Settings“.
f Scroll down with or to „Party Dial“ in the menu.
f Select „Party Dial“ with .
f Confirm the warning screen with .
The party dial screen is similar to the default screen. Left side shows CH1, right side CH2. Besides
RF and AF meter you can see the frequency as well as the corresponding pre-set number out of the
licence list. The selected channel will be indicated by a highlighted “pre-set “number.
f With or the frequency (licence list pre-set) of the selected channel can be changed.
f The button allows you to change the active channel between CH1 or CH2.
f To leave the party dial mode, press and confirm the warning screen with .