Users Manual

14 | EK 6042
Putting the EK 6042 into operating
Connecting the EK 6042 to a sound recording device or a
mixing console
The EK 6042 can receive two transmitters simultaneously. In order to
connect the EK 6042 to the sound recording device or the mixing console,
you require at least one Y-adapter cable.
왘 Connect a Y-adapter cable to each of the desired audio outputs
(MAIN 1/2 and/or AUX 1/2).
왘 Set the desired audio format via the MAIN Format menu item: digital
AES-3 or analog.
The primary audio outputs MAIN 1/2 can output the audio signals of
both receiving channels either in analog form or digitally. The secondary
audio outputs AUX 1/2 and (Top) AUX 1/2 can only output analog
audio signals.
Connecting headphones
CAUTION
Hearing damage due to high volumes
The headphones connected to the headphone output are
capable of producing high sound pressure levels. Higher
volumes or longer durations can damage your hearing.
왘Set the volume to a medium level.
왘 Reduce the volume level before changing a transmitter
or a frequency.
왘 Mount the backpanel adapter (see page 13).
왘 Connect the headphones to the 3.5 mm jack socket PHONES of the back-
panel adapter.