Users Manual

EK 6042 | 15
Using the EK 6042
Using the EK 6042
Switching the EK 6042 on or off
To switch the EK 6042 on:
왘 Long-press the button.
The standard display appears. The volume of the headphone output is
automatically adjusted to a low level.
To switch the EK 6042 off:
왘 If a submenu is open (see also page 16), press the button repeatedly
until the standard display, the CH1 display or the CH2 display is shown
on the display panel.
왘 Long-press the button.
An animation is shown. The EK 6042 then switches off.
Calling up the standard display, the CH1 display or the
CH2 display
Using the operating menu
Calling up the operating menu
왘 Short-press the button when the standard display, the CH1 display
or the CH2 display is shown.
After switch-on, the standard
display 1 is shown on the
display panel. To change to
the CH1 display 2 or to the
CH2 display 3:
왘 Press th
e
button or the
button.
To change from the operating
menu (see page 16) back to
the standard display:
왘 Press th
e
button
repeatedly until the
standard display is shown.
1
2
3