Users Manual

8 AVX
Product overviews
BA 20 accupack for the EKP AVX receiver
5 Status LED
lights up green:
A radio link to the transmitter is established. The accupack of the received
transmitter is sufficiently charged.
flashes green:
The Pair button has been short-pressed. The paired transmitter is being iden-
tified.
flashes alternately
green and red:
The Pair button has been long-pressed. The receiver establishes a radio link to
a transmitter whose Pair button has also been long-pressed.
lights up yellow:
The received transmitter has been muted with its MUTE switch.
flashes red:
The accupack capacity of the received transmitter is only sufficient for approx.
15 minutes of operation.
lights up red:
No radio link to a transmitter.
6 Pair button Short-press to identify the paired transmitter (see page 26).
Long-press to change the pairing (see page 26).
7 Rotatable XLR-3 connector for connection to the video camera or the DSLR camera
The receiver can be rotated by a maximum angle of 320°.
8 EKP AVX adapter The EKP AVX adapter consists of a hot shoe adapter and a belt clip.
The belt clip allows the attachment of the receiver to a belt or a pocket (see
page 15).
The hot shoe adapter allows the attachment of the receiver to the hot shoe of
a DSLR camera. The receiver can then be connected to the DSLR camera using
the CI 400 adapter cable (see page 14).
max. 320°
1
2
1 Charge status LED
lights up green: The accupack is fully charged.
lights up red: The accupack is being charged.
2 Micro USB socket for charging the accupack (see page 21)