Instruction manual ew 100 G4
Table Of Contents
- Overview
- ew 100 G4 series products
- Accessories
- The frequency bank system
- Installing and starting up ew 100 G4 series devices
- Installing the EM 100 G4
- Installing the SKM 100 G4
- Installing the SK 100 G4
- Installing the ASA 214
- Using ew 100 G4 series devices
- Using the EM 100 G4
- Operating elements on the front of the device
- Switching the EM 100 G4 on and off
- Muting the audio output
- Lock-off function
- Displays on the EM 100 G4 display panel
- Buttons for navigating through the menu
- Home screen
- Setting options in the menu
- Menu structure
- Squelch menu item
- Easy Setup menu item
- Frequency Preset menu item
- Name menu item
- AF Out menu item
- Equalizer menu item
- Auto Lock menu item
- Advanced menu item
- Advanced -> Tune menu item
- Advanced -> Guitar Tuner menu item
- Advanced -> Pilot Tone menu item
- Advanced -> LCD Contrast menu item
- Advanced -> Reset menu item
- Advanced -> Software Revision menu item
- Using the SKM 100 G4
- Operating elements of the SKM 100 G4 handheld transmitter
- Switching the SKM 100 G4 handheld transmitter on and off
- Muting the handheld transmitter (AF mute)
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SKM 100 G4 handheld transmitter display panel
- Buttons for navigating the SKM 100 G4 menu
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
- Advanced > Mute Mode menu item (SKM 100 G4-S only)
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
- Using the SK 100 G4
- Operating elements of the SK 100 G4 bodypack transmitter
- Switching the SK 100 G4 bodypack transmitter on and off
- Muting the bodypack transmitter (AF mute)
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SK 100 G4 bodypack transmitter display panel
- Buttons for navigating the SK 100 G4 menu
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
- Advanced > Mute Mode menu item
- Advanced > Cable Emulation menu item
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
- Establishing a radio link
- Synchronizing devices
- Using the ASA 214
- Overview
- Product variants
- Frequency tables
- Specifications
- Pin assignment
- Cleaning and maintenance
138
ASA 214
Specifications
►
ASA 214 antenna splitter 2 × 1:4 or 1 × 1:8, active
Connection cable 8 pieces, 50 cm, BNC
Frequency range
ASA 214-UHF:
ASA 214-1G8:
470 – 870 MHz at –3 dB
1785 – 1805 MHz at –3 dB
Amplification
In A – Out A
In A – Out A1 ... A4
In B – Out B1 ... B4
0 ± 1 dB
0 ± 1 dB
0 ± 1 dB
IIP3 20 dBm min.
23 dBm, typical
Impedance 50 Ω
Reflection loss 10 dB (all RF outputs)
Operating voltage 13.8 V DC (with power supply unit
NT 1-1)
Power consumption
ASA 214: 245 mA
ASA 214-1G8: 350 mA
Total power consumption max. 2.0 A with 4 receivers and 2 ×
2 antenna amplifiers per antenna
input
Antenna amplifier power supply
at ANT RF IN A and ANT RF IN B
12 V, 130 mA
Receiver power supply at A1 to
A4
12 V (protected against reverse
supply), 350 mA
Relative air humidity 5 to 95%
Temperature range
Operation:
Storage:
-10 °C to +55 °C (14 °F to 131 °F)
-20 °C to +70 °C (-4 °F to 158 °F)
Dimensions approx. 212 x 168 x 43 mm
Weight approx. 1090 g