Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 2/37
Technical information
Media control protocol description
This document describes the Media Control Protocol for all aboved listed stationary Sennheiser
devices. It allows to access a subset of attributes of the listed devices. By applying this protocol it is
possible to set an attribute or to read its current status.
The IP address can be set individually at the device’s display. When the connection is established,
data can be exchanged between the Sennheiser device and the connected media control device.
Limitation of liability
To the extent not prohibited by law, in no event will Sennheiser or its licensors be liable for any lost
revenue, profit or data, or for special; indirect; consequential, incidental or punitive damages.
USA; CANADA
In no event will Sennheiser‘s liability to you, whether in contract, tort (including negligence) or oth-
erwise exceed the amount paid by you for the provided software.
EUROPE
Sennheiser shall only be liable, irrespective of the legal grounds, for direct damages caused by the
intentional or grossly negligent conduct of Sennheiser, its legal representatives or managerial em-
ployees. The liability shall be limited to those damages, which must typically be expected by using
the software offered by Sennheiser. Any further liability shall be excluded.
Any liability of Sennheiser for damages arising from violation of life, body and health, from the
assumption of a guarantee or from a procurement risk as well as Sennheiser‘s liability for damages
pursuant to the local Product Liability Act shall remain unaffected.
Change log
Revision Chapter/command Page