Media Control Protocol for ew G4 series

TI 1254 v1.0 - ew G4 | 25/37
Technical information
Media control protocol description
Equalizer [set and get]
Valid for device EM only
Description
This command adjusts the equalizer on an EM device. The status of the equalizer can also be read.
Parameters
Name Value range Get request Set request Relative
change
Equalizer setting 0: flat
1: low cut
2: low cut and high boost
3: high boost
- X No
Examples
Equalizer 1<CR>
Equalizer is set to flat. Sennheiser device replies with Equalizer 1<CR>.
Equalizer 5<CR>
1020: Value out of range [Equalizer 5 ]<CR>.
Equalizer<CR>
current status is sent to media control, e.g. Equalizer 2<CR> => low cut and high boost.