Instruction manual

3
The SK 300 G3 bodypack transmitter
The SK 300 G3 bodypack transmitter
The SK 300 G3 bodypack transmitter is part of the evolution wireless series
generation 3 (ew G3). With this series, Sennheiser offers high-quality
state-of-the-art RF transmission systems with a high level of operational
reliability and ease of use. Transmitters and receivers permit wireless
transmission with studio-quality sound.
Features of the evolution wireless 300 G3 series:
Optimized PLL synthesizer and microprocessor technology
HDX noise reduction system
•Pilot tone squelch control
True diversity technology
Switching bandwidth of 42 MHz
Increased immunity to intermodulation and interferences in multi-
channel operation
The frequency bank system
Please note: Frequency usage is different for each country. Your
Sennheiser partner will have all the necessary details on the available legal
frequencies for your area.
The bodypack transmitter is available in 6 UHF frequency ranges with
1,680 transmission frequencies per frequency range:
Each frequency range (A–E, G) offers 26 frequency banks with up to
24 channels each:
Each of the channels in the frequency banks “1” to “20” has been factory-
preset to a fixed transmission frequency (frequency preset).
The factory-preset frequencies within one frequency bank are intermodu-
lation-free. These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency informa-
tion sheet can be downloaded from the SK 300 G3 product page on our
website at www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select and store
transmission frequencies. It might be that these transmission frequencies
are not intermodulation-free.
Range A: 516 – 558 MHz Range C: 734 – 776 MHz
Range G: 566 – 608 MHz Range D: 780 – 822 MHz
Range B: 626 – 668 MHz Range E: 823 – 865 MHz
Frequency bank 1... 20
Frequency bank U1 ... U6
Channel 24 – frequency preset
Channel 1 – frequency preset
Channel 2 – frequency preset
Channel 24 – freely selectable frequency
Channel 1 – freely selectable frequency
Channel 2 – freely selectable frequency