Media Control Protocol for ew G3 and 2000 series

Media control protocol for ew G3 and 2000 series
01/2012 14/37
BankList [get only]
Valid for device EM and SR
Description
By using this command with its parameter a list of frequencies in kHz is sent to
media control. The order of the sent frequencies are conform to the channels which
means that first frequency f1 correspond to channel 1, second frequency f2
correspond to channel 2 and so on.
Bank number 21 until 26 correspond to user bank 1 to user bank 6.
It may happen that less channels of a user bank are used as possible. For example
there are 32 channels in a user bank but only channels 2 and 4 are used. The
command BankList returns in such a case only 4 frequencies, for instance "BankList
0 822000 0 819375<CR>" . The remaining channels from 5 to 32 are left out
because all of them would be 0's anyway.
Parameters
Examples
BankList 10<CR>
List of frequencies of bank 10 is sent to media control.
BankList 21<CR>
List of frequencies of user bank 1 is sent to media control.
Name Value Range Get
Request
Set
Request
Relative
change
Number of bank 1..20: Presets
21..26: User banks
X – No