W 300 Instructions for use
Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest.
Contents The evolution wireless series ew 300 G2 ........................................................... 50 The channel bank system ............................................................................................. 50 Safety instructions ................................................................................................. 51 System variants ...................................................................................................... 51 Overview of operating controls ....
The evolution wireless series ew 300 G2 With the evolution wireless series ew 300 G2, Sennheiser offers musicians, video and sound amateurs high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitters and receivers permit wireless transmission with studio-quality sound.
Safety instructions Never open electronic units! If units are opened by customers in breach of this instruction, the warranty becomes null and void. Keep the units away from central heating radiators and electric heaters. Never expose them to direct sunlight. Use the units in dry rooms only. Use a damp cloth for cleaning the units. Do not use any cleansing agents or solvents.
Overview of operating controls EM 300 G2 rack-mount receiver Operating controls Graphic display panel Graphic display, backlit Display for the current channel bank “1...8, U” / rocker button (DOWN/UP), backlit Display for the current channel number “1...8” SET button, backlit “B.
SK 300 G2 bodypack transmitter Operating controls LC display panel Microphone/line input (MIC/LINE), 3.5 mm jack socket Alphanumeric display Antenna “B.
SKM 300 G2 radiomicrophone Operating controls LC display panel Sound inlet basket Alphanumeric display Color-coded identification ring for microphone heads green: MD 835 microphone head blue: MD 845 microphone head red: ME 865 microphone head “B.
Indications and displays on the receiver Transmitter battery status indication The 4-step transmitter battery status display on the receiver display panel provides information on the transmitter’s remaining battery/accupack BA 2015 capacity: 3 segments: 2 segments: 1 segment: Battery icon flashing: capacity approx. 100 % capacity approx. 70 % capacity approx. 30 % LOW BAT In addition, the text “LOW BAT” (backlit in red) flashes in alternation with the standard display.
Diversity display The EM 300 G2 receiver operates on the true diversity principle (see “Diversity reception“ on page 85). The diversity display indicates whether diversity section I (i.e. antenna 1) or diversity section II (i.e. antenna 2) is active. Button backlighting In standby operation, the ON button is backlit in red. When the receiver is switched on, the SET button and the / button are additionally backlit in green.
AF peak indication (SK 300 G2 only) The yellow LED (AF PEAK) at the front of the SK 300 G2 lights up when the audio input level is excessively high (AF peak) and overmodulates the transmitter. At the same time, the 7-step level display for audio signal “AF” shows full deflection for the duration of the overmodulation. “PILOT” display The “PILOT” display lights up when the pilot tone evaluation is activated.
Preparing the components for use EM 300 G2 rack-mount receiver Mounting the receiver feet To ensure that the receiver cannot slip on the surface on which it is placed, four self-adhesive soft rubber feet are supplied. Ensure that the base of the receiver is clean before mounting the rubber feet. Fix the rubber feet to the base of the receiver by peeling of the safety paper and fitting them as shown in the digram on the left.
Connecting the amplifier/mixing console The EM 300 G2’s audio outputs are available as an XLR-3M socket and a ¼” (6.3 mm) jack socket , allowing you to simultaneously connect two units (e.g. amplifier, mixing console). The adjusted audio output level is common for both sockets. Connect the amplifier/mixing console to the XLR-3M socket or the ¼” (6.3 mm) jack socket . For detailed information on balanced and unbalanced connection, please refer to the section “Connector assignment” on page 87.
To mount two EM 300 G2 into a rack: Place the two receivers side by side onto a flat surface, their bottom sides facing upwards. Align the connecting plate over the holes in the bottom sides of the receivers. Secure the connecting plate to the receivers using eight of the supplied recessed head screws (M 3x6). Hook the two rack mount “ears” to the front panels of the receivers.
SK 300 G2 bodypack transmitter Inserting and replacing the batteries For powering the SK 300 G2 bodypack transmitter, use two 1.5 V AA size batteries. Press the two unlocking buttons cover . and open the battery compartment Insert the two batteries as shown in the diagram on the left. Please observe correct polarity when inserting the batteries. Close the battery compartment. The battery compartment cover into place with an audible click.
Attaching the microphones Use the microphone clips to attach the ME 2 and ME 4 clip-on microphones to clothing (e.g. tie, lapel). Adjust the ME 3 headmic so that a comfortable and secure fit is ensured. Positioning the microphones The ME 3 and ME 4 microphones are directional microphones, i.e. their sound inlet should always be directed towards the sound source (e.g. mouth). The ME 2 with omni-directional pick-up pattern picks up sound equally from all directions.
SKM 300 G2 radiomicrophone Inserting and replacing the batteries For powering the SKM 300 G2 radiomicrophone, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack. Unscrew the display section from the radiomicrophone’s body ' by turning it counterclockwise. Slide back the display section as far as it will go. Open the battery compartment cover . Insert the two batteries or the BA 2015 accupack as shown in the diagram on the left.
Using the components Switching the components on/off ew 300 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button (receiver) or the ON/OFF button (transmitters) serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display. Note: Remove the batteries or the accupack when the units will not be used for extended periods of time.
Muting the transmitters Both transmitters have a MUTE switch that noiselessly mutes the transmitter’s audio signal without switching the transmitter off. Muting the SK 300 G2 bodypack transmitter Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the transmitter display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the “MUTE” display also appears on the receiver display panel.
The operating menu A special feature of the Sennheiser ew 300 G2 series is the similar, intuitive operation. As a result, the units are easy to operate and adjustments to the settings can be made quickly and “without looking” – even in stressful situations, for example on stage or during a live show or presentation. The buttons Buttons Mode To ...
Working with the operating menu By way of example of the “Tune” menu, this section describes how to use the operating menu. After switching the unit on, the standard display is shown on the display panel. EM 300 G2 Transmitters Getting into the operating menu Press the SET button to get from the standard display into the operating menu. The last menu selected flashes on the display. With the receiver, the current setting is additionally displayed.
Exiting the operating menu Select the “Exit” menu to exit the operating menu and to return to the standard display. When you have entered the operating menu, the ON/OFF button or the ON button (EM 300 G2 receiver only) serves as the ESC (cancel) key, i.e. by briefly pressing the ON/OFF or POWER button, you cancel your entry and return to the standard display.
Operating menu of the receiver SET Exit Menu Exit Bank Channel SET 1 01 Bank 1.01 B.CH Bank 3.01 B.CH 786.300 MHz Current channel bank 790.250 MHz / : 1...8, U (User Bank) Changing the channel bank SET: Stores the setting Stored Menu Bank 3 Channel 01 Tune 786.400MHz SET Channel 3.01 790.250 MHz B.CH Channel 3.08 807.900 MHz B.CH / : Channel 01...08 Current channel and corresponding frequency Changing the channel SET: Stores the setting Stored Menu Channel 08 Tune 807.
Scan Menu Scan AF Out Squelch SET +18 High AF Out +18 AF Out –24 Current audio output level / : +18 ...0...
Reset Menu Reset Pilot Lock SET On Off Pilot On Pilot Off Pilot tone evaluation activated or deactivated Activating/deactivating the pilot tone evaluation / : On, Off SET: Stores the setting STORED Menu Pilot Off Lock Off LCD Contr IIIIII..... SET Lock Off Lock On Lock mode activated or deactivated Activating the lock mode STORED Menu Lock On LCD Contr IIIIII.....
Operating menu of the transmitters EXIT SET BANK SET Changing the channel bank BANK 1 BANK U Current channel bank / : 1...8, U (User Bank) SET: Stores the setting STORED CHAN SET 1.03 B.CH Current channel (display depends on "DISPLY" setting) Changing the channel 1.02 / : Channel B.CH 01...08 SET: Stores the setting STORED TUNE SET 790.025 MHz Current frequency on the selected channel Setting the frequency for channel bank "U" 791.
DISPLY NAME SET Assigning the transmitter a name VOCAL Current transmitter name STORED RESET SET Loading the factorypreset default settings RST. NO Security check GUCAL / : Name (6 characters) Letters w/o pronounciation marks, numbers from 0...9, special characters, spaces SET: 5 x next character, then store RST.
Adjustment tips for the operating menu Switching between channel banks BANK Bank Via the “Bank” menu, you can switch between the nine channel banks. The channel banks “1” to “8” have eight switchable channels that are factorypreset to a transmission/receiving frequency (see “The channel bank system“ on page 50). The channel bank “U” (user bank) has eight switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range.
Scanning the channel banks for free channels (EM 300 G2 only) Scan Before putting one or several transmission links into operation, you should scan the channel banks for free channels. Displaying the last scan result Select the “Scan” menu. Scan Channel list Scan new Scan reset Bank 1 2 3 Free 08 08 03 Bank 5 6 7 Free 06 08 02 Select “Channel list” to display the last scan result. The number of free channels is displayed for all channel banks. 4 04 8 U 01 08 Channel 1.01 786.300 MHz B.
Multi-channel operation For multi-channel operation, only use the free channels in a channel bank. Before putting the transmission links into operation, we recommend performing an auto scan. Scan a receiver for free channels. Bank 1 2 3 Free 08 08 03 Bank 5 6 7 Free 06 08 02 Select a channel bank with a sufficient number of free channels. 4 04 8 U Apply the scan result to all other transmitters and receivers.
Adjusting the audio output level (EM 300 G2 only) AF Out Via the “AF Out” menu, you can adjust the audio output level of the receivers. The level can be adjusted in eight steps. Adapt the level of the audio output (AF OUT) to the input of the connected unit.
Selecting the standard display DISPLY Display Via the “Display” menu, you can select the standard display: EM 300 G2 rack-mount receiver Selectable standard display Contents of standard display “Main” (standard display) “Frequency” (display of the frequency) “Bank/Channel” (display of the channel bank and channel number) “Name” (display of the freely selectable name) “AF meter” (graphic display of the AF level) “Second RF” (display of the RF levels of the two diversity sections) SK 300 G2 body pack
Entering a name NAME Name Via the “Name” menu, you can enter a freely selectable name for each transmitter and receiver. You can, for example, enter the name of the performer for whom the adjustments have been made. The name can be displayed on the standard display and can consist of up to six characters (transmitters) and up to ten characters (receiver) such as: y letters (without pronounciation marks), y numbers from 0 to 9, y special characters e.g. () - . _ and spaces.
Activating/deactivating the lock mode LOCK Lock Via the “Lock” menu, you can activate or deactiveate the lock mode. The lock mode prevents that the transmitter or receiver is accidentally programmed or switched off during operation. The lock mode icon on the display indicates that the lock mode is activated. EM 300 G2 To deactivate the lock mode, first press the SET button and then press the / buttons to select “Lock Off”.
If problems occur...
Recommendations and tips ... for the ME 2 and ME 4 clip-on microphones y To reduce level variations to a minimum when the user turns his or her head away from the microphone, attach the microphone as centrally as possible. y To protect the microphone against excessive sweat/moisture, avoid direct skin contact. y Attach the microphone carefully and conduct the cable so that noise due to friction is avoided.
... for multi-channel operation y For multi-channel operation, you can only use the channels in a channel bank. Each of the channel banks “1” to “8” accommodates eight factorypreset frequencies which are intermodulation-free. For alternative frequency combinations, please refer to the enclosed frequency table. The freely selectable frequencies can be selected via the “TUNE” menu and can be stored in the channel bank “U”.
Additional information HDX noise reduction RF link Inherent noise of the RF link Transmitter Receiver Progress you can hear: The evolution wireless G2 series is equipped with HDX, the Sennheiser noise reduction system that reduces RF interference. It increases the signal-tonoise ratio in wireless audio transmission to more than 110 dB.
noisy signal. Please set the sensitivity correctly for the microphone/usage and check it before every performance to ensure best operation. Sennheiser miniature clip-on microphones can be attached in various ways: they can, for example, be attached to the hairline or to clothing (e.g. tie or lapel). However it is fixed, please make sure that the microphone is protected against sweat/moisture and make-up. Squelch Pilot tone squelch The transmitter adds a pilot tone to the audio signal.
Specifications System RF characteristics Modulation Frequency ranges Transmission/receiving frequencies wideband FM 518–554, 626–662, 740–776, 786–822, 830–866 MHz 8 channel banks with 8 factory-preset channels each Switching bandwidth Nominal/peak deviation Frequency stability 1 channel bank with 8 freely selectable channels (1440 frequencies, tunable in steps of 25 kHz) 36 MHz ±24 kHz/±48 kHz ≤ ±15 ppm AF characteristics Noise reduction system AF frequency response S/N ratio (at 1 mV and peak deviatio
Transmitters RF characteristics RF output power at 50 Ω AF characteristics Max. input voltage (at peak deviation) Input impedance Microphone Line Microphone Line Overall device Power supply Nominal voltage Max. power consumption at nominal voltage Power consumption with switched-off transmitter Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm] Weight (incl. batteries) SK 300 G2 typ. 30 mW SKM 300 G2 1.8 Vrms, unbalanced 2.
Polar diagrams and frequency response curves of microphones/microphone heads Polar diagrams of microphones/microphone heads MD 835 ME 865 ME 3 MD 845 ME 4 Frequency response curves of microphones/microphone heads MD 835 ME 2 MD 845 ME 3 ME 865 ME 4 88
Accessories MD 835 Microphone head for SKM 300 G2 (green identification ring), dynamic, cardioid MD 845 Microphone head for SKM 300 G2 (blue identification ring), dynamic, super-cardioid ME 865 Microphone head for SKM 300 G2 (red identification ring), condenser, super-cardioid MZW 1 Wind- and popshield for SKM 300 G2 MZQ 1 Microphone clamp for SKM 300 G2 ME 2 Clip-on microphone for SK 300 G2, condenser, omni-directional ME 4 Clip-on microphone for SK 300 G2, condenser, cardioid ME 3 Headmic for SK 300 G2, c
DEUTSCH Wir übernehmen für das von Ihnen gekaufte Produkt eine Garantie von 24 Monaten. Ausgenommen hiervon sind dem Produkt beigefügte Zubehörartikel, Akkus und Batterien; denn diese Produkte haben wegen ihrer Beschaffenheit eine kürzere Lebensdauer, die zudem im Einzelfall konkret von Ihrer Nutzungsintensität abhängt. Die Garantiezeit beginnt ab Kaufdatum. Zum Nachweis heben Sie bitte unbedingt den Kaufbeleg auf.
ITALIANO La Sennheiser garantisce il prodotto da voi acquistato per una durata di 24 mesi. Sono esclusi da questa garanzia gli accessori in dotazione con il prodotto, gli accumulatori e le batterie perché questi prodotti hanno un ciclo di vita più breve che dipende molto dall'in-tensità d'utilizzo. II periodo di garanzia decorre dalla data dell'acquisto. Fa fede il docu-mento d'acquisto valido agli effetti fiscali che deve essere conservato.
EG-Konformitäts-Erklärung / EC Certificate of Conformity / Déclaration de conformité pour la CEE Certificato di conformitá comunitario / Declaración de Conformidad / EG-Conformiteitsverklaring SENNHEISER electronic GmbH & Co.
Bemerkung: Vor Inbetriebnahme sind die jeweiligen länderspezifischen Vorschriften zu beachten! Important: Before putting the device into operation, please observe the respective country-specific regulations! Important: Avant d’utiliser l’appareil, veuillez observer les dispositions légales en vigueur dans votre pays.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ.
