Users Manual

Adjustment tips for the operating menu
38
Selecting the status display
Via the “Display” menu, you can select the status display:
Change to the setting mode of the “Display” menu.
The current status display starts flashing.
Turn the jog dial 7 to select one of the four status displays.
Press the save button 8.
The selected status display becomes effective. The display changes to
the selection mode of the operating menu.
Changing the IP address
Via the “IP-Addr” menu, you can display and change the receiver’s IP
address. The IP address consists of four bytes and each byte consists of up
to three digits (from 0 to 255). The receiver is factory-preset to dynamic
IP addressing (“Auto”).
To manually assign an IP address:
Change to the setting mode of the “IP-Addr” menu.
The first byte starts flashing.
Turn the jog dial 7 to select a value between 0 and 255.
Press the jog dial 7 to confirm the first byte and change to the next
byte.
Repeat the last two steps to enter all four bytes.
After you have selected the complete IP address, press the
save button 8.
Switch the receiver off and on again (see page 19).
The new IP address becomes effective.
Display
4
IP-A
d
10
49
68
75
p
ander
D
yn
u
s
Selectable status display Contents of the display
1. Name
displays the freely selectable name
2. Bank/Channel
displays the frequency bank and the
channel number
3. Name/Command
displays the freely selectable name
and the command display
(EM 3732 COM-II receiver only)
4. Bank/Channel/Command
displays the frequency bank, the channel
number and the command display
(EM 3732 COM-II receiver only)
M
H
z
776.000
NAME
HD
P
M
H
z
776.000
01.01
HD
P
M
H
z
776.000
NAME
COM
AF
HD
P
HD
P
M
H
z
800.450
BANK
CH
03.03
COM
AF
HD
P
1
NAME
776.000
esc
save
sync
digital audio
processing
sync
D
EV
M
H
z
777.005
U.01
BANK
CH
COM
AF
HD
P
8
7
IP-Addr
192.
168.
0.
0
MA
C
00
1
1B
6
00
0
s
play
192.
168.
0.
0
Auto
192.
049
049.
068
068.
esc
save
sync
digital audio
processing
sync
D
EV
M
H
z
777.005
U.01
BANK
CH
COM
AF
HD
P
8
7