Instruction Manual
Table Of Contents
- Index
- Important safety instructions
- The EM 500 G3 rack-mount receiver
- Delivery includes
- Product overview
- Putting the receiver into operation
- Using the receiver
- Using the operating menu
- Adjustment tips and functions
- Synchronizing transmitters with receivers
- Cleaning the receiver
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
Putting the receiver into operation
13
왘 Secure the rack mount “ears” to the sides of the receiver using the
previously removed recessed head screws (see right-hand diagram).
Fitting the
device feet
왘 Clean the base of the receiver where you want to fix the device feet.
왘 Fit the device feet to the four corners of the receiver as shown.
왘 Place the receiver on a flat, horizontal surface.
Connecting the
rod antennas
The supplied rod antennas can be mounted quickly and easily and are
suitable for all applications where – good reception conditions provided –
a wireless transmission system is to be used without a large amount of
installation work.
왘 Connect the two rod antennas to the BNC sockets and at the
rear of the receiver.
왘 Align the rod antennas upwards in a V-shape.
Do not fit the device feet when mounting the receiver into a
19” rack.
XXX - XXX MHzFREQ. RANGE-X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER EM 5 00
IDENT. NO.: XXXXXX
IC: 2099A-XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682
XXX - XXX MHzFREQ. RANGE-X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER
EM
500
IDENT. NO.: XXXXXX
IC: 2099A-XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682