Instruction Manual
Table Of Contents
- Index
- Important safety instructions
- The EM 500 G3 rack-mount receiver
- Delivery includes
- Product overview
- Putting the receiver into operation
- Using the receiver
- Using the operating menu
- Adjustment tips and functions
- Synchronizing transmitters with receivers
- Cleaning the receiver
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
Putting the receiver into operation
18
Connecting receivers in a network
You can connect several receivers in a network. The receivers are remote
controlled via a PC running the “Wireless Systems Manager” (WSM)
software. This software will assist in the quick and safe configuration of
multi-channel systems.
For further information on downloading the software, visit the ew G3
product page on our website at www.sennheiser.com.
왘 Connect a standard network cable (at least Cat 5) to the LAN socket
of the receiver.
왘 Connect your receivers to an Ethernet switch.
왘 Additionally, connect a PC to the Ethernet switch as shown.
왘 Set up your multi-channel system as described on page 46.
The yellow LED at the rear of the receiver indicates the network
activity:
XXX - XXX MHzFREQ. RANGE-X:
SER. NO.: XXXXXXXXXX
TRUE DIVERSITY RECEIVER EM 5 00
IDENT. NO.: XXXXXX
IC: 2099A-XXXXXXX
DESIGNED IN GERMANY, ASSEMBLED IN USA
0682
Yellow LED ... Connection status
... lit Network cable connected to the Ethernet
switch or PC
... off No connection