Instruction Manual
Table Of Contents
- Index
- Important safety instructions
- The EM 500 G3 rack-mount receiver
- Delivery includes
- Product overview
- Putting the receiver into operation
- Using the receiver
- Using the operating menu
- Adjustment tips and functions
- Synchronizing transmitters with receivers
- Cleaning the receiver
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
Using the receiver
24
Muting the audio signal
To mute the audio signal:
To unmute the audio signal:
If “RX Mute On?” or “RX Mute Off?” appears on the display panel but you
do not wish to change the status of the muting function:
왘 When one of the standard displays is shown on the display
panel, press the STANDBY button.
“RX Mute On?” appears on the display panel.
왘 Press the jog dial.
The audio signal is muted. “RX Mute” flashes in alternation with
the current standard display. The display panel is backlit in red.
왘 Press the STANDBY button.
“RX Mute Off?” appears on the display panel.
왘 Press the jog dial.
The muting is canceled and the display backlighting changes
from red to orange again.
왘 Press the STANDBY button.
The status of the muting function remains unchanged and the
current standard display appears.