Instruction Manual
Table Of Contents
- Index
- Important safety instructions
- The EM 500 G3 rack-mount receiver
- Delivery includes
- Product overview
- Putting the receiver into operation
- Using the receiver
- Using the operating menu
- Adjustment tips and functions
- Synchronizing transmitters with receivers
- Cleaning the receiver
- Recommendations and tips
- If a problem occurs ...
- Accessories and spare parts
- Specifications
Adjustment tips and functions
32
왘 Position the transmitter in the area in which it is to be used and switch
it on.
왘 Leave the transmitter switched on and go to your receiver.
왘 On the receiver, change to the “Soundcheck” standard display.
왘 Go to your transmitter.
왘 With the transmitter, walk up and down the area in which it is to be
used.
왘 Then leave the transmitter there and do not switch it off.
During the soundcheck, the receiver records the RF level and the AF level.
The recording result is displayed on the “Soundcheck” standard display:
If no transmitter is being received or if the signal is below
the squelch threshold level, “MUTE” appears on the display panel
(see “If a problem occurs ...” on page 51).
Soundcheck
20.30 ew500 G3
542.625
MHz
542.625
SKM500
ew300 G3
B.CH: 20.30
EQ
+ 12dB
MHz
P
P
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
PEAK
-10
0
40
30
20
10
-20
-40
AF
RF
-30
“Soundcheck”
standard display
Select any other
standard display
542.625
ew500 G3
B.CH: 20.30
MUTE
EQ
+ 12dB
MHz
“Soundcheck”
standard display
“Receiver Parameters”
standard display
SKM500
P
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
Soundcheck
20.30 ew500 G3
542.625
MHz
P
PEAK
-10
0
40
30
20
10
-20
-40
AF
RF
-30
Soundcheck
20.30 ew500 G3
542.625
MHz
P
PEAK
-10
0
40
30
20
10
-20
-40
AF
RF
-30
AF MaxRF Max
RF Min