Users Manual
Using the EM 6000
125
Dante Settings
In this menu item, you can configure the network settings for the Dante™
network. This menu item is available only with the product version
EM 6000 DANTE.
▷ See „System -> Dante Settings (only EM 6000 DANTE) menu item“
Booster Feed
In this menu item, you can activate the power supply for an external anten-
na amplifier if you are using active remote antennas.
▷ See „System -> Booster Feed menu item“
Brightness
In this menu item, you can set the brightness of the display. The set bright-
ness applies to both EM 6000 displays.
▷ See „System -> Brightness menu item“
Auto Setup
In this menu item, you can activate the auto setup function for the
EM 6000.
▷ See „System -> Auto Setup menu item“
Info
This menu item shows the MAC address of the EM 6000 and the current
version of the firmware. You cannot configure any settings here.
▷ See „System -> Info menu item“
Hardware
This menu item shows information about the hardware. You cannot config-
ure any settings here.
▷ See „System -> Hardware menu item“
Help
In this menu item, you can find the link to the English version of this instruc-
tion manual.
▷ See „System -> Help menu item“