Users Manual

Using the SK 6000
158
Transmission mode
The transmission mode for Digital 6000 series
transmitters is the long range mode for the
Digital 9000 series. As a result, the transmitters in the Digital 6000 series
are compatible with Digital 9000 if the EM 9046 is operated in long range
mode.
Operating the SK 6000 menu
Navigating through the menu
To open the menu:
▷ Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷ Press the UP or DOWN buttons to navigate through the individual
menu items.
▷ Press the SET button to open the selected menu item.
„Operating elements of the SK 6000 bodypack transmitter“
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷ Press the UP or DOWN buttons to set the displayed value.
▷ Press the SET button to save the setting.
▷ Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
„Operating elements of the SK 6000 bodypack transmitter“
Menu item overview
In the menu items, you can configure the settings below and display infor-
mation.
Version: Firmware Version 1.1.26
Tune menu item
In this menu item, you can adjust a frequency in 25 kHz steps.
When you save the setting, the set frequency is automatically as-
signed to the user-defined frequency preset U, the handheld transmitter
switches from the frequency preset set up to now to the frequency preset
U, and sends a radio signal to the set frequency.