Users Manual

Using the SK 6000
161
MIC/LINE menu item
In this menu item, you can configure whether to use a mic signal or
a line signal, or whether to detect the type of signal automatically.
• AUTO: The SK 6000 automatically detects whether a mic signal or a line
signal is being received. If it is a line signal, the Cable menu item for
configuring the cable emulator is enabled (see above).
• MIC: Use this option if a microphone is connected to the SK 6000.
• LINE: Use this option if a line level source is connected to the SK 6000
via a line cable. This option enables the Cable menu item for configuring
the cable emulator (see above).
Reset menu item
In this menu item, you can reset the transmitter settings to the fac-
tory settings.
Information menu item
In this menu item, you can display the installed firmware version
and the overall frequency range for the transmitter.