Users Manual

Using the SK 6000
162
Operating the SK 6000 with the KA 9000 COM com-
mand adapter
You can use the KA 9000 COM command adapter to switch the audio chan-
nel on the EM 6000 receiver via remote control.
You can press the COMMAND button to control the audio signal routing of
the XLR-3 sockets and the Dante socket on the EM 6000.
You can set the function of the Command button in the EM 6000 menu (see
„Command Mode menu item“).
►
Updating the firmware of the SK 6000
The transmitter firmware is updated via the receiver.
▷ Update the transmitter firmware via the TX Update function in the Sys-
tem menu item on the receiver. See „System -> TX Update menu item“
under „System menu item“.