Users Manual
Installing the SK 6212
70
Connecting an instrument or line source to the
SK 6212
You can connect instruments or audio sources with a line level to the
SK 6212 bodypack transmitter.
To do so, you require the Sennheiser CI R-4A-NRS cable (6.3 mm (1/4")
jack plug to 3-pin audio connector)
To connect an instrument or line source to bodypack transmitter:
▷ Connect the 3-pin audio connector of the CI R-4A-NRS cable to the
SK 6212 bodypack transmitter audio socket as shown in the figure.
▷ Tightly screw on the audio cable coupling ring on the audio socket
thread of the SK 6212 bodypack transmitter.
►