Instruction manual - Digital 6000 (v4.0)

ManualsBrandsSennheiser ManualsLED & LCD TVsDigital 2-channel receiver for live production applications

161

162

163

164

165

166

167

168

169

170

Table Of Contents

The Digital 6000 Series
- Features
Products in the Digital 6000 series
- EM 6000 | EM 6000 DANTE 2-channel receiver
  - Package contents
  - Product overview
- SKM 6000 handheld transmitter
  - Package contents
  - Product overview
- SK 6000 bodypack transmitter
  - Package contents
  - Product overview
- SK 6212 bodypack transmitter
  - Package contents
  - Product overview
- Modular L 6000 charger
  - Package contents
  - Product overview
Accessories
- Charging modules for L 6000 charger
- Rechargeable batteries and battery compartments
- L 60 charger
- Digital 9000 series handheld transmitter and bodypack transmitter
  - SKM 9000 product variants
  - SK 9000 product variants
- KA 9000 COM command adapter
- Microphones and cables
- Antennas and accessories
Installing Digital 6000 series devices
Installing the EM 6000
- Connectors on the rear of the device
  - Product overview for the rear side of the EM 6000
  - Product overview for the rear side of the EM 6000 DANTE
- Connecting/disconnecting the EM 6000 to/from the power supply system
- Connecting the EM 6000 to a network
- Outputting analog audio signals
- Outputting digital audio signals
- Outputting audio via a Dante™ network (EM 6000 DANTE only)
- Connecting the word clock
- Connecting remote antennas
  - Cascading receivers
- Connecting rod antennas
- Installing the EM 6000 in a rack
Installing the SKM 6000
- Inserting and removing the BA 60 rechargeable battery
- Inserting and removing the B 60 battery compartment
- Replacing the microphone module
Installing the SK 6000
- Inserting and removing the BA 61 rechargeable battery
- Inserting and removing the B 61 battery compartment
- Mounting the antenna
- Connecting a microphone to the SK 6000
- Connecting an instrument or line source to the SK 6000
- Connecting the KA 9000 COM command adapter to the SK 6000
Installing the SK 6212
- Inserting and removing the BA 62 rechargeable battery
- Mounting the antenna
- Connecting a microphone to the SK 6212
- Connecting an instrument or line source to the SK 6212
Installing the L 6000 | LM 6060 | LM 6061 | LM 6062
- Connecting/disconnecting the L 6000 to/from the power supply system
- Connecting the L 6000 to a network
- Installing the LM 6060, LM 6061 and LM 6062 charging modules in the L 6000
- Installing the L 6000 in a rack
Using Digital 6000 series devices
Using the EM 6000
- Operating elements on the front of the device
  - Product overview for the front of the EM 6000
- Switching the EM 6000 on and off
- Displays on the EM 6000 display panel
- Buttons for navigating through the menu
- Home screen
  - Home screen 1
  - Home screen 2
  - Home screen 3
  - Home screen 4
  - Home screen 5 (audio mute)
- Muting the audio signal
- Setting options in the menu
- Menu structure
- Frequency menu item
- Name menu item
- Sync Settings menu item
  - Gain
  - Low Cut
  - Auto Lock
  - Display panel
  - Cable
  - Power LED Mode
  - MIC Line Mode
  - Frequency Only
- Encryption menu item
- Command Mode menu item
  - EXAMPLE:
- Scan & Auto-Setup menu item
  - Performing a frequency scan and automatic frequency setup
  - Step 1a: New Scan
  - Step 1b: Use Old Scan
  - Step 2: Editing displayed frequencies
  - Step 3: Starting the automatic frequency setup
- Walktest menu item
- AF Output menu item
- Test Tone menu item
- Bank Edit menu item
- System menu item
- System -> Transmission Mode menu item
  - Step 1: Set the transmission mode in the receiver
  - Step 2: Synchronize the transmission mode on the transmitter
- System -> Wordclock menu item
- System -> Network menu item
- System -> Device ID menu item
- System -> Dante Settings (only EM 6000 DANTE) menu item
  - Device ID
  - Mode
  - PrimNet
  - SecNet
  - Info
- System -> Booster Feed menu item
- System -> Brightness menu item
- System -> Auto Setup menu item
- System -> Info menu item
- System -> Hardware menu item
- System -> Help menu item
- System -> TX Update menu item
- System -> Reset menu item
- Using the headphone output
- Updating the firmware of the receiver
- Updating the firmware of the Dante™ interface
- Status messages
Using the SKM 6000
- Operating elements of the SKM 6000 handheld transmitter
- Switching the SKM 6000 on and off
- Displays on the SKM 6000 handheld transmitter display panel
- Operating the SKM 6000 menu
- Updating the firmware of the SKM 6000
Using the SK 6000
- Operating elements of the SK 6000 bodypack transmitter
- Switching the SK 6000 on and off
- Displays on the SK 6000 bodypack transmitter display panel
- Operating the SK 6000 menu
- Operating the SK 6000 with the KA 9000 COM command adapter
- Updating the firmware of the SK 6000
Using the SK 6212
- Operating elements of the SK 6212 bodypack transmitter
- Switching the SK 6212 on and off
- Home screen
- Displays on the SK 6212 bodypack transmitter display
- Operating the SK 6212 menu
- Updating the firmware of the SK 6212
Using the L 6000
- Switching the L 6000 on and off
- Charging rechargeable batteries
- Meaning of the LEDs on the L 6000 charger and LM 6060, LM 6061 and LM 6062 charging modules
- Preparing rechargeable batteries for storage (storage mode)
  - Meaning of the status LEDs in storage mode
- Resetting settings (factory reset)
- Updating the firmware
- Operating the L 6000 via a network
Establishing a radio link
- Adjusting frequencies
- Encrypting the radio link
- Meaning of the Link Quality Indicator
Synchronizing devices
Overview
Recommendations for using antennas
- Rod antennas (included in the delivery)
- Remote antennas
Equidistant frequency grid
- Setting up the equidistant frequency grid
Link Density mode
Word clock scenarios for digital audio (AES3 and Dante™)
- Word clock with analog audio
- Word clock with digital audio
- Defining the master and slave
Overview
Product variants
- EM 6000 | EM 6000 DANTE product variants
- SKM 6000 product variants
- SK 6000 product variants
- SK 6212 product variants
- L 6000 product variants
- LM 6060, LM 6061 and LM 6062 product variants
Specifications
- System
- EM 6000
- EM 6000 DANTE
- SKM 6000
- SK 6000
- SK 6212
- L 6000
- LM 6060 | LM 6061 | LM 6062
- BA 60 | BA 61 | BA 62
Cleaning and maintenance
- Cleaning the sound inlet basket of the microphone module
- Cleaning the SK 6000 bodypack transmitter contacts.
- Cleaning the L 6000 charger

Using the SK 6212

161

Switching the SK 6212 on and off

►

Switching on the SK 6212 bodypack transmitter

To switch on the SK 6212:

▷ Hold down the ON/OFF button until the Sennheiser logo appears on the

display.

The LED above the ON/OFF button lights up green.

Switching on the SK 6212 bodypack transmitter and deactivating the RF

signal

To switch the SK 6212 bodypack transmitter on while deactivating the RF

signal:

▷ Press and hold the ON/OFF button until the LED above the ON/OFF

lights up red.

The message RF MUTE appears on the display.

To reactivate the RF signal:

▷ Press the ON/OFF button.

The RF signal is activated.

The LED above the ON/OFF button lights up green.

Switching off the SK 6212 bodypack transmitter

To switch off the SK 6212:

▷ Hold down the ON/OFF button until the display goes off.