Instruction manual - Digital 6000 (v4.0)

Using the SK 6212
165
Menu item overview
In the menu items, you can configure the settings below and display infor-
mation.
Frequency menu item
In this menu item, you can adjust a frequency in 25 kHz steps.
Observe the general requirements and restrictions for using frequencies at
the following address:
www.sennheiser.com/frequency-information
Name menu item
In this menu item, you can set a freely selectable name for the transmitter.
The name can be up to eight characters long.
If you enter a name for the radio link in the Name menu item („Name
menu item“) on the receiver and synchronize the receiver with the
transmitter („Synchronizing devices“), the name entered in the transmitter
is overwritten with the name entered in the receiver.
Gain menu item
In this menu item, you can adjust the input gain in 3 dB steps.
Alternatively, you can also adjust the input gain in the receiver and syn-
chronize it with the transmitter. See „Sync Settings menu item“.
Low Cut menu item
In this menu item, you can adjust the value for the low cut filter.
Setting: 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz
Alternatively, you can also adjust the low cut filter in the receiver and syn-
chronize it with the transmitter. See „Sync Settings menu item“.
Display menu item
In this menu item, you can choose whether the default home screen on the
transmitter display shows the set frequency or the name of the transmitter
or radio link.
Alternatively, you can also adjust the home screen display in the receiver
and synchronize it with the transmitter. See „Sync Settings menu item“.