Release Notes – Firmware v3.2.1 (incl. SKM 6000 v1.1.51 & SK 6212 v1.3.23)

RN 1110 v3.2.1 - Digital 6000 Firmware Update | 2/3
Digital 6000
Release Notes
Previous Releases
EM 6000 - Firmware version 3.1.1
(incl. SK/SKM 6000 Firmware version 1.1.51 / SK 6212 Firmware version 1.3.23)
f Improved RF performance in venues with extreme reflections and fading
f Updated capsule detection
f Bug fixes and optimizations
EM 6000 - Firmware version 3.0.4
(incl. SK/SKM 6000 Firmware version 1.1.51 / SK 6212 Firmware version 1.3.23)
f Support of new Link Density transmission mode
f Update of Japan frequency ranges to ensure consistent results of frequency scan:
lower frequency limit increased from 470.150 MHz to 470.200 MHz
upper frequency limit decreased from 713.850 MHz to 713.800 MHz
f Bug fixes and optimizations
EM 6000 - Firmware version 2.2.4
(incl. SK/SKM 6000 Firmware version 1.1.29 / SK 6212 Firmware version 1.3.6)
f Full support of SK 6212 mini bodypack transmitter
f Auto Setup: Frequency limit for USA adapted to new regulatory limitation (608 MHz)
f Auto Setup: Update of country selection
f Channel spacing of E bank (for equidistant frequency grid) changed from 600 kHz to 400 kHz
f Update of frequency ranges due to regulatory reasons:
lower frequency limit increased from 470.100 MHz to 470.200 MHz
upper frequency limit decreased from 713.900 MHz to 713.800 MHz
upper frequency limit of A5-A8 US range decreased from 607.900 MHz to 607.800 MHz
f Default user frequency changed from 470.100 MHz to 470.200 MHz
f Bug fixes and optimizations
EM 6000 - Firmware version 2.1.9
(incl. SK/SKM 6000 Firmware version 1.1.28)
With the new firmware all EM 6000 receiver support monitoring and control with Yamaha™ CL and
QL mixing consoles.
f RF, LQI and Audio levels plus battery status can be monitored directly on the console´s screen,
and the analog audio output level can be controlled from the surface.
f Yamaha™ users must update their CL and QL console firmware to new version V5.0, available on
www.yamahaproaudio.com
f Updated Frequency Auto Setup for revised A5-A8 US range, 550.000 – 607.900 MHz
f Due to new frequency regulations in the US and Canada, the SK(M) 6000 A5-A8 US transmission
range must be limited to 550.000 – 607.900 MHz.
f We recommend all users update their SK(M) 6000 A5-A8 US firmware to version 1.1.28 for
compliance in the US and Canada.
Note: This firmware update has no impact on other SK(M) devices and frequency ranges.