Users Manual
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Preparing the Digital 9000 system for use
46 | Digital 9000
Preparing the L 60 charger for use
Cascading several chargers
Up to 4 L 60 charger can be cascaded together and can be powered by the
NT 3-1 mains unit.
왘 Prepare the L 60 chargers:
– Make sure that the chargers are disconnected from the mains.
–
Unscrew the two screws
6 at the bottom of one charger.
– Til
t the charger to the side and slide out the rails 5 completely.
– Tighten the two screws 6.
왘 Unscrew the two sc
rews 7 at the bottom of a second charger.
왘 Slide th
e second charger onto the rails 5 of the first charger and
tighten the two screws7.
왘 Repeat
for the other chargers.
Setting up or mounting the charger
CAUTION
Risk of staining of surfaces!
Surfaces can be tr
eated with varnish, polish or synthetics which might
cause stains when they come into contact with other materials. Despite a
thorough testing of the materials used by us, we cannot rule out the pos-
sibility of staining.
왘 Do not place the L 60 charger on delicate surfaces.
7
6
5