Users Manual
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Digital 9000 | 63
Using the EM 9046
“Audio output level” – Adjusting the analog output levels
Via the “Audio output level” menu item, you can adjust the level of all or
individual channels of the Analog Audio Out (AAO) module.
왘 Call up the “Audio output level” menu item.
The installed audio modules are displayed as follows:
- digital audio modules: “Slot digital”;
- analog audio modules: “Slot analog”;
- not installed audio modules: “Slot not available”.
왘 Select individual or all channels of the AAO module by turning
the jog dial to the left/right. Selected channels are highlighted
in blue.
왘 Call up the level adjustment by pressing the jog dial. The outer
ring of the channel is highlighted in blue.
왘 Adjust the level.
The setting becomes effective immediately.
왘 Press the jog dial to confirm your setting and to return to the channel
selection.
왘 Adjust the level of further channels.
왘 Press the button F. Your settings are stored and the receiver then
switches to the main menu.
To change to the main menu without storing your settings:
왘 Press the esc button L.
If you call up the level adjustment of all channels, the smallest value
adjusted for a channel is displayed in the menu selection. By turning
the jog dial, you can adjust the level of all channels to the value dis-
played in the menu selection.
Audio output level
output level
0000
000
0
0
0
0
1234
5678
EM 9046 AAO EM 9046 DAO
Analog multicore
0
0