Users Manual
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Using the EM 9046
68 | Digital 9000
In the extended menu, you can adjust the following settings:
“Factory reset” – Resetting the receiver to the factory defaults
Via the “factory reset” menu item, you can reset your receiver to the fac-
tory default settings. To do so, follow the prompt on the main screen to
press the button F for 5 seconds.
The following menu items are reset to their factory default settings:
• In addition, all configurations saved in the “save config” menu item are
deleted.
• The event log is deleted and then the deleting itself is logged.
Menu Menu item Factory default setting Page
Main menu
“System
setup”
Output level 0 dB 63
Word clock 96 kHz 64
Network |
name of the network
EM9046_1 66
Network |
IP settings
Auto 66
Brightness Medium level 66
Extended
menu
“Service
setup”
Date & time |
selected time zone
Amsterdam, Berlin, Bern,
Rome, Stockholm, Vienna
69
Main menu
“Channel
setup”
Frequency Without connected
boosters:
470.000 MHz
With connected boosters:
A1.1–A1.8
or
B1.1–B1.8,
allocated to the channels
1–8
77
Name Ch1–Ch6 78
Cmd mode Toggle 78
Encryption Off 79
Gain 0 dB 82
Low cut 30 Hz 82
Display Name 83
Lock Off 83
Cable Line 83
Factory reset
factory reset