Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
13
Product overviews
Displays of the transmitters
Optional accessories for the transmitters
BA 10 accupack for the SKM D1 or SKM-S D1 handheld transmitter
BA 30 accupack for the SK D1 bodypack tranmsitter
USB power supply/charger for charging the accupacks
1 Name of the radio link For details, see page 32.
2 7-segment display of the battery
or accupack capacity
For details, see page 27.
3 6-segment RF signal level display Displays the field strength of the trans-
mitted signal at the receiver.
NAME
1
3
2
1
3
4
2
5
6
1 Micro USB socket with
cover flap
for charging the accupack with any USB power sup-
ply/charger (for details, see page 25)
2 Charge status LED
lights up red: The accupack is being charged
lights up green: The accupack is fully charged
3 Contact surfaces for powering the handheld transmitter
4 Accupack contains the Li-Ion rechargeable battery
5 Catches Press simultaneously to release the accupack from
the handheld transmitter.
6 Charging contacts for charging the accupack in the charging unit
1
3
2
4
5
1 Contact surfaces for powering the bodypack transmitter
2 Accupack contains the Li-Ion rechargeable battery
3 Charging contacts for charging the accupack in the charging unit
4 Micro USB socket with
cover flap
for charging the accupack with any USB power sup-
ply/charger (for details, see page 25)
5 Charge status LED
lights up red: The accupack is being charged
lights up green: The accupack is fully charged
1
3
2
1 NT 5-10-U USB power supply/charger (country-specific)
for charging the accupacks
2 USB connector
(type A)
for connection to the USB power supply/charger
3 Micro USB connector for connection to an accupack