Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
26
Using the products
Using the products
The Sennheiser series offers true ease of use: The devices
of a set are already paired and are therefore ready for immediate use. The
receiver features automatic frequency management and continually scans the
RF environment for usable, interference-free frequencies. To ensure optimum
levels, the transmitters automatically set the correct microphone sensitivity.
Switching the devices on or off
Switching the receiver on
왘 Short-press the STANDBY button.
After switch-on, the display panel first shows a logo and then the standard
display (see page 9). The status LED indicates the current status of the
receiver (see page 8). The radio link to the last paired transmitter is estab-
lished automatically as soon as the paired transmitter is switched on.
Switching the receiver off
왘 Long-press the STANDBY button.
The display panel and the status LED go off.
Switching the bodypack transmitter on
왘 Short-press the ON/OFF button.
The standard display appears on the display panel (see page 13). The sta-
tus LED indicates the current status of the bodypack transmitter (see
page 12). The radio link to the last paired receiver is automatically estab-
lished as soon as the paired receiver is switched on.
Switching the bodypack transmitter off
왘 Long-press the ON/OFF button.
The display panel and the status LED go off.
Switching the handheld transmitter on
왘 Short-press the ON/OFF button in the direction of the transmitter body.
The standard display appears on the display panel (see page 13). The sta-
tus LED indicates the current status of the handheld transmitter (see
page 11). The radio link to the last paired receiver is automatically estab-
lished as soon as the paired receiver is switched on.
After switch-on, the receivers and transmitters will take approx.
10 seconds to establish the radio links. The more devices are switched
on, the longer it takes to establish all the radio links.
SHORT = ON
LONG = OFF
SHORT = ON
LONG = OFF
SHORT = ON