Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
30
Using the products
Using the operating menu of the receiver
Using the buttons for navigation
Overview of the operating menu of the receiver
Button Function
Press the
STANDBY button
• Short-press: Switches the receiver on
• Long-press: Switches the receiver off
Short-press the
ESC button
• Navigates to the next higher level in the menu
• Exits the menu item without storing changes to
the settings
Long-press the
ESC button
• Returns to the standard display
Press the jog dial
• Changes from the current standard display to
the operating menu
• Calls up the selected menu item
• Changes to the selected submenu
Turn the jog dial
• Switches between the standard display and the
extended standard display
• Changes to the previous or next menu item
• Changes the settings of a menu item
SHORT
esc
LONG
esc
Network
Settings
System
Settings
Mode
Walk TestName
Low Cut
Equalizer
De-Esser
Auto Lock
Mute
Switch
Display
Brightness
IP
Subnet
Gateway
MAC
IPv6
Factory
Reset
System
Info
Help
Audio
Settings
Effects
Reset
Audio
Level
Auto Gain
Control
Output
Type
Level 2
Level 1
Home
Standard display
(see page 9)
Extended standard display
(see page 10)