Instruction manual ew D1

Table Of Contents
33
Using the products
Select one of the seven frequencies (50, 125, 315, 800, 2k, 5k or 10k) and
press the jog dial.
Turn the jog dial to increase or reduce the selected level.
Turning the jog dial by one notch increases or reduces the level by 1 dB. You
can increase or reduce the level by a maximum of 12 dB. Your setting is rep-
resented by bars.
Press the ESC button.
Select the next frequency and repeat the steps.
Once you have adjusted all frequency bands as desired, confirm with SAVE.
Adjusting the de-esser
You can attenuate sibilance in vocals and speech.
Select Audio SettingsDe-Esser.
Select the desired profile.
If one of the de-esser functions is activated, DE-S appears in inverse on the
standard display.
Activating/deactivating the dynamic compression
You can activate one of the dynamic compression profiles in order to boost
very quiet passages and to attenuate particularly loud passages. You can
choose from preset profiles for different situations.
Select Audio SettingsAuto Gain Control.
Select the desired profile.
If one of the dynamic compression profiles is activated, AGC appears in
inverse on the standard display.
Resetting the audio settings
The Effects Reset menu item allows you to reset the receiver‘s audio settings
made in the Audio Settings menu to the factory default settings. All other
receiver settings remain unchanged.
50
+12
0
-12
EQUALIZER
125 315 800
2k 5k
10k SAVE
50 Hz
125 Hz
315 Hz
800 Hz
2 kHz
5 kHz
10 kHz
Hz
100 1k 10k
dB
+15
+10
+5
0
–5
–10
–15
20 50 200 500 2k 5k 20k
Equalizer
De-Esser
Auto Gain Control
Effects Reset
L
ow
C
u
t
Off
On
Off
Audio
Equalizer
De-Esser
Auto Gain Control
Effects Reset
Audio Level
Off
Off
On
10 dB
Audio
De-Esser
Auto Gain Control
Effects Reset
Audio Level
Output Type
On
On
10 dB
Line
Audio