Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
36
Using the products
왘 Use a QR scanner (e.g. your smartphone or a reading device for QR codes)
to scan the QR code that appears on the receiver display panel or follow the
given link in your browser.
Alternatively, you can click on the desired link in the above table.
Retrieving system information
You can display the serial number and the current firmware version of the
receiver.
왘 Select System Settings – System Info.
The serial number as well as the version number and the date of the current
firmware are displayed.
왘 Press the ESC button to return to the operating menu.
Resetting the receiver to the factory default settings
The System Settings – Factory Reset menu item allows you to reset the
receiver to its factory default settings.
After the reset, the receiver is restarted and the standard display is shown on
the display panel.
Changing the network configuration
Changing the IP address assignment
mode
You can choose between static and dynamic IP address assignment.
왘 Select Network Settings – Mode.
Changing the IP address You can change the IP address of the receiver. The new IP address becomes
effective only if Fixed IP has been selected in the Mode menu item.
왘 Select Network Settings – IP.
왘 Enter the IP address.
왘 Select Save and confirm by pressing the jog dial.
Changing the subnet mask You can change the subnet mask of the receiver.
왘 Select Network Settings – Subnet.
왘 Enter the subnet mask.
왘 Select Save and confirm by pressing the jog dial.
Exit
Display Brightness
Help
System Info
Factory Reset
75
System
Exit
Help
System Info
Factory Reset
System
If you change a setting in the Mode, IP, Subnet and Gateway sub-
menus of the Network Settings menu, you will be prompted to restart
the receiver.
왘 Switch the receiver off and on again so that changes to the network
configuration take effect.
Mode
IP
Subnet
Fixed IP
0.0.0.0.
0000
MAC
00
:
1B
:
66
:
7D
:
56
:
D3
Network
Exit
Setting Meaning
Fixed IP The receiver is assigned a static IP address. You can enter the
static IP address via the IP menu item.
Automatic When switched on, the receiver is automatically assigned a
dynamic IP address.
E
x
it
Mode
IP
Subnet
Gateway
Fixed IP
0.0.0.0.
0.0.0.0.
0000
Network
Mode
IP
Subnet
Gateway
IPv6 1188:80F3:1388:
Fixed IP
0.0.0.0.
0.0.0.0.
0.0.0.0.
Network