User Manual

Installing the SKP 100 G4
33
Installing the SKP 100 G4
These sections contain detailed information about installing the
SKP 100 G4.
You can find information about operating the SKP 100 G4 under “Using the
SKP 100 G4”.
Inserting and removing the batteries/rechargeable
batteries
You can operate the plug-on transmitter either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
Slide the battery compartment cover in the direction of the embossed
arrow and open the cover.
Insert the batteries or the accupack as shown below. Please observe
correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The cover locks into place with an audible click.