Instruction Manual
Table Of Contents
- Overview
- ew 100 G4 series products
- Accessories
- The frequency bank system
- Installing and starting up ew 100 G4 series devices
- Installing the EM 100 G4
- Installing the SKM 100 G4
- Installing the SK 100 G4
- Installing the ASA 214
- Using ew 100 G4 series devices
- Using the EM 100 G4
- Operating elements on the front of the device
- Switching the EM 100 G4 on and off
- Muting the audio output
- Lock-off function
- Displays on the EM 100 G4 display panel
- Buttons for navigating through the menu
- Home screen
- Setting options in the menu
- Menu structure
- Squelch menu item
- Easy Setup menu item
- Frequency Preset menu item
- Name menu item
- AF Out menu item
- Equalizer menu item
- Auto Lock menu item
- Advanced menu item
- Advanced -> Tune menu item
- Advanced -> Guitar Tuner menu item
- Advanced -> Pilot Tone menu item
- Advanced -> LCD Contrast menu item
- Advanced -> Reset menu item
- Advanced -> Software Revision menu item
- Using the SKM 100 G4
- Operating elements of the SKM 100 G4 handheld transmitter
- Switching the SKM 100 G4 handheld transmitter on and off
- Muting the handheld transmitter (AF mute)
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SKM 100 G4 handheld transmitter display panel
- Buttons for navigating the SKM 100 G4 menu
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
- Advanced > Mute Mode menu item (SKM 100 G4-S only)
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
- Using the SK 100 G4
- Operating elements of the SK 100 G4 bodypack transmitter
- Switching the SK 100 G4 bodypack transmitter on and off
- Muting the bodypack transmitter (AF mute)
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SK 100 G4 bodypack transmitter display panel
- Buttons for navigating the SK 100 G4 menu
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
- Advanced > Mute Mode menu item
- Advanced > Cable Emulation menu item
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
- Establishing a radio link
- Synchronizing devices
- Using the ASA 214
- Overview
- Product variants
- Frequency tables
- Specifications
- Pin assignment
- Cleaning and maintenance
Installing the EM 100 G4
24
Creating a data network
You can cascade multiple EM 100 G4s to a multi-channel system using the
two DATA RJ-10 interfaces (up to 12 receivers). You can perform a frequen-
cy setup for the entire multi-channel system via this data network using the
Easy Setup function.
The setup only works when all of the receivers have the same frequency
range.
▷ Connect the receivers to create a multi-channel system using the sup-
plied RJ-10 cables as shown in the diagram.
Both RJ-10 sockets are interchangeable. There is no set order for ca-
bling.
►
You can find more information about the Easy Setup function under
“Easy Setup menu item”.