Instruction manual ew 100 G4

ManualsBrandsSennheiser ManualsPro AudioEW 100 G4-865-S Wireless Handheld Microphone System with MME 865 Capsule

Table Of Contents

Overview
ew 100 G4 series products
- EM 100 G4 rack receiver
- SKM 100 G4 handheld transmitter
- SK 100 G4 bodypack transmitter
Accessories
- Microphones and cables
- Rechargeable battery and charger
- Accessories for rack mounting
  - GA 3 rack mount kit
  - AM 2 antenna front mounting kit
- Antennas and accessories
- Additional accessories
  - Color labeling set
  - Microphone clamp
The frequency bank system
Installing and starting up ew 100 G4 series devices
Installing the EM 100 G4
- Connectors on the rear of the device
  - Product overview for the rear side of the EM 100 G4
- Connecting/disconnecting the EM 100 G4 to/from the power supply system
- Creating a data network
  - Setting up a multi-channel system with more than 12 receivers
- Outputting audio signals
- Connecting antennas
- Installing the EM 100 G4 in a rack
  - Mounting a single receiver in a rack
  - Mounting two receivers side by side in a rack
Installing the SKM 100 G4
- Inserting and removing the batteries/rechargeable batteries
  - Battery status
- Replacing the microphone module
- Changing the colored ring
Installing the SK 100 G4
- Inserting and removing the batteries/rechargeable batteries
  - Battery status
- Connecting a microphone to the SK 100 G4
- Connecting an instrument or line source to the SK 100 G4
- Attaching the bodypack transmitter to clothing
Installing the ASA 214
- Connectors on the rear of the device
  - Product overview for the rear side of the ASA 214
- Connecting/disconnecting the ASA 214 to/from the power supply system
- Connecting receivers to the ASA 214
- Connecting antennas
  - Connecting remote antennas
  - Connecting rod antennas
- Information on antenna amplifiers and cable lengths
- Configuring multi-channel systems
- Installing the ASA 214 in a rack
  - Mounting a single antenna splitter in a rack
  - Mounting two antenna splitters side by side in a rack
Using ew 100 G4 series devices
Using the EM 100 G4
- Operating elements on the front of the device
  - Product overview for the front of the EM 100 G4
- Switching the EM 100 G4 on and off
- Muting the audio output
- Lock-off function
- Displays on the EM 100 G4 display panel
- Buttons for navigating through the menu
- Home screen
  - Receiver Parameters standard display
  - Soundcheck standard display
  - RF Min
  - RF Max
  - AF Max
  - Guitar Tuner standard display
- Setting options in the menu
- Menu structure
- Squelch menu item
- Easy Setup menu item
  - Scan New List
  - Current List
  - Reset
  - Performing multi-channel frequency setup
  - Setting up a multi-channel system with more than 12 receivers
- Frequency Preset menu item
- Name menu item
- AF Out menu item
- Equalizer menu item
- Auto Lock menu item
- Advanced menu item
- Advanced -> Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced -> Guitar Tuner menu item
- Advanced -> Pilot Tone menu item
- Advanced -> LCD Contrast menu item
- Advanced -> Reset menu item
- Advanced -> Software Revision menu item
Using the SKM 100 G4
- Operating elements of the SKM 100 G4 handheld transmitter
- Switching the SKM 100 G4 handheld transmitter on and off
- Muting the handheld transmitter (AF mute)
  - SKM 100 G4
  - SKM 100 G4-S
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SKM 100 G4 handheld transmitter display panel
  - Select a standard display
- Buttons for navigating the SKM 100 G4 menu
  - Navigating through the menu
  - Making changes in a menu item
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced > Mute Mode menu item (SKM 100 G4-S only)
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
Using the SK 100 G4
- Operating elements of the SK 100 G4 bodypack transmitter
- Switching the SK 100 G4 bodypack transmitter on and off
- Muting the bodypack transmitter (AF mute)
- Deactivating the RF signal (RF mute)
  - Deactivating the RF signal with the MUTE switch
  - Deactivating the RF signal with the ON/OFF button
- Lock-off function
- Displays on the SK 100 G4 bodypack transmitter display panel
  - Select a standard display
- Buttons for navigating the SK 100 G4 menu
  - Navigating through the menu
  - Making changes in a menu item
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced > Mute Mode menu item
- Advanced > Cable Emulation menu item
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
Establishing a radio link
- Setting notes
Synchronizing devices
Using the ASA 214
- Operating elements on the front of the device
- Switching the ASA 214 on and off
Overview
Product variants
- EM 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
- SKM 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
- SK 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
Frequency tables
Specifications
- EM 100 G4
- SKM 100 G4
- SK 100 G4
- ASA 214
  - Specifications
  - Block diagram
Pin assignment
- 3.5 mm stereo jack plug
- 3.5 mm mic jack plug
- 3.5 mm line jack plug
- 6.3 mm stereo jack plug, balanced (audio in/loop out)
- 6.3 mm mono jack plug, unbalanced
- 6.3 mm stereo jack plug for headphone jack
- XLR-3 plug, balanced
- Hollow jack plug for power supply
Cleaning and maintenance
- Cleaning the sound inlet basket of the microphone module

Installing the SKM 100 G4

These sections contain detailed information about installing and starting

up the SKM 100 G4.

You can find information about operating the SKM 100 G4 under “Using

the SKM 100 G4”.