User Manual

Installing the ASA 214

Mounting a single antenna splitter in a rack

To mount the antenna splitter in a rack, you will need the GA 3 rack mount-

ing kit (optional accessory).

To fasten the mounting angle of the GA 3 rack mounting kit:

▷ Unscrew and remove the two recessed head screws (M4x8) on each

side of the antenna splitter.

▷ Secure the mounting angles to the sides of the antenna splitter using

the previously removed recessed head screws.

►

▷ Secure the blanking plate to one of the mounting angles using two re-

cessed head screws (M6x10).

►