Instruction manual Set 100 P G3

Synchronizing transmitters with diversity receivers

When synchronizing transmitters with diversity receivers, please observe the following:

Upon delivery, transmitter and diversity receiver are synchronized with each other. If,

however, you cannot establish a transmission link between transmitter and diversity

receiver, you have to synchronize the channels of the devices:

 Deactivate the RF signal on all transmitters (see page 21).

This prevents that, during the frequency scan, the channels used by switched-on trans-

mitters are displayed as “used”.

 With a diversity receiver, perform a frequency preset scan to scan the frequency banks

for unused channels (“Scan New List”, see page 24).

 Select a frequency bank and a channel on this diversity receiver (“Current List”, see

page 24).

If you want to set up a multi-channel system, select a frequency bank with a sufficient

number of unused channels for all planned transmission links.

 Synchronize a transmitter with the diversity receiver (see page 19).

The receiver’s frequency, name and pilot tone setting are transferred to the transmitter.

OR:

 Manually set the transmitter to the same frequency bank and channel that you set on the

receiver.

 Activate the RF signal on the transmitter.

The transmission link is established.

If you want to set up a multi-channel system:

 Repeat the following 4 steps for each additional transmission link:

– Perform a frequency preset scan with the next diversity receiver.

– Select a channel from the same frequency bank as with the first diversity receiver.

– Synchronize a transmitter with the diversity receiver.

– Activate the RF signal on the transmitter.

 Make sure that the desired frequencies are listed in the enclosed frequency

information sheet.

OR:

 Contact your Sennheiser partner who will be pleased to calculate intermodula-

tion-free frequencies for you.

 Make sure that the desired frequencies are approved and legal in your country

and, if necessary, apply for an operating license.

ew 100 P G3 Set _529660_0309_Sp9.book Seite 26 Mittwoch, 8. April 2009 6:57 18