Instruction manual 300 IEM Series G3 Download300 IEM Series: SR 300 IEM G3 and EK 300 IEM G3
Table Of Contents
- Important safety instructions
- The evolution wireless series ew 300 IEM G3
- The frequency bank system
- Product overviews
- Putting the devices into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Setting up the transmitter on a flat surface
- Mounting the transmitter into a 19” rack
- Connecting the mains unit
- Connecting devices to the input sockets
- Connecting devices to the output sockets
- Connecting a remote antenna to the BNC socket and positioning the antenna
- Connecting the AC 3 antenna combiner to the BNC socket
- Daisy chaining audio signals
- Connecting transmitters in a network
- Putting the EK 300 IEM G3 diversity receiver into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Using the devices
- Switching the devices on/off
- Monitoring the audio signal via headphones
- Deactivating the lock mode temporarily
- Selecting a standard display on the diversity receiver
- Adjusting the audio channels on the transmitter
- Activating/deactivating the RF signal on the transmitter
- Synchronizing transmitters and EK 300 IEM G3 receivers via the infra-red interface
- Using the operating menus
- Synchronizing the transmitter with the diversity receiver
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the devices
18
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item. If the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the devices:
The lock mode icon of the transmitter or the lock mode icon of the diversity receiver
flashes prior to the lock mode being activated again.
Selecting a standard display on the diversity receiver
SR 300 IEM G3 transmitter EK 300 IEM G3 receiver
왘 Press the jog dial. 왘 Press the SET button.
“Locked” appears on the display panel.
왘 Turn the jog dial. 왘 Press the UP/DOWN button 왖/왔.
“Unlock?” appears on the display panel.
왘 Press the jog dial. 왘 Press the SET button.
The lock mode is temporarily deactivated:
• When you are in the operating menu, the lock mode remains deactivated until you exit the
operating menu.
• When a standard display is shown, the lock mode is automatically activated after
10 seconds.
왘 Press the ESC button to select a standard display. In stereo mode, you can
alternatively press the UP/DOWN button 왖/왔.
Contents of the display Selectable standard display
“Frequency/Name”
with “Mute” display
“Frequency/Limiter”
with display of the audio channels (Stereo/Focus)
“Frequency/High Boost“
with display of the audio channels (Stereo/Focus)
SET
SET
519.150
ew300IEM
B.Ch: 1. 1
Standard -18dB
MHz
MHz
519.150
ew300 IEM
AFRF
MUTE
P
P
ESC
MHz
519.150
ew300 IEM
AFRF
MUTE
P
Lim: - 6dB
AFRF
B.CH 1.1
P
AFRF
MHz
519.150
P