Instruction manual 300 IEM Series G3 Download300 IEM Series: SR 300 IEM G3 and EK 300 IEM G3
Table Of Contents
- Important safety instructions
- The evolution wireless series ew 300 IEM G3
- The frequency bank system
- Product overviews
- Putting the devices into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Setting up the transmitter on a flat surface
- Mounting the transmitter into a 19” rack
- Connecting the mains unit
- Connecting devices to the input sockets
- Connecting devices to the output sockets
- Connecting a remote antenna to the BNC socket and positioning the antenna
- Connecting the AC 3 antenna combiner to the BNC socket
- Daisy chaining audio signals
- Connecting transmitters in a network
- Putting the EK 300 IEM G3 diversity receiver into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Using the devices
- Switching the devices on/off
- Monitoring the audio signal via headphones
- Deactivating the lock mode temporarily
- Selecting a standard display on the diversity receiver
- Adjusting the audio channels on the transmitter
- Activating/deactivating the RF signal on the transmitter
- Synchronizing transmitters and EK 300 IEM G3 receivers via the infra-red interface
- Using the operating menus
- Synchronizing the transmitter with the diversity receiver
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the operating menus
23
Using the operating menus
The buttons of the SR 300 IEM G3 transmitter
The buttons of the EK 300 IEM G3 diversity receiver
Button Function of the button
Press the STANDBY
button
• Switches the transmitter on and off
• Cancels the entry and returns to the standard display
(ESC function)
• Activates/deactivates the RF signal
(special function, see page 19)
Press the jog dial • Changes from the standard display to the operating menu
• Calls up a menu item
• Enters a submenu
• Stores the settings and returns to the operating menu
Turn the jog dial • Changes to the next/previous menu item
• Changes the setting of a menu item
Button Function of the button
Press the ESC button • Selects a standard display (see page 18)
• Cancels the entry and returns to the current standard display
(ESC function)
Press the SET button • Changes from the standard display to the operating menu
• Calls up a menu item
•Enters a submenu
• Stores the settings and returns to the operating menu
Press the UP/DOWN
button 왖/왔
•In Focus mode:
Adjusts the balance
• In stereo mode:
Selects a standard display (see page 18)
• Changes to the next/previous menu item
• Changes the setting of a menu item
ESC
SET