Instruction manual 300 IEM Series G3 Download300 IEM Series: SR 300 IEM G3 and EK 300 IEM G3
Table Of Contents
- Important safety instructions
- The evolution wireless series ew 300 IEM G3
- The frequency bank system
- Product overviews
- Putting the devices into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Setting up the transmitter on a flat surface
- Mounting the transmitter into a 19” rack
- Connecting the mains unit
- Connecting devices to the input sockets
- Connecting devices to the output sockets
- Connecting a remote antenna to the BNC socket and positioning the antenna
- Connecting the AC 3 antenna combiner to the BNC socket
- Daisy chaining audio signals
- Connecting transmitters in a network
- Putting the EK 300 IEM G3 diversity receiver into operation
- Putting the SR 300 IEM G3 transmitter into operation
- Using the devices
- Switching the devices on/off
- Monitoring the audio signal via headphones
- Deactivating the lock mode temporarily
- Selecting a standard display on the diversity receiver
- Adjusting the audio channels on the transmitter
- Activating/deactivating the RF signal on the transmitter
- Synchronizing transmitters and EK 300 IEM G3 receivers via the infra-red interface
- Using the operating menus
- Synchronizing the transmitter with the diversity receiver
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
Product overviews
6
Overview of the displays of the SR 300 IEM G3 transmitter
After switch-on, the transmitter displays the standard display.
Display Meaning
Audio level
(AF = Audio Frequency)
Modulation of the left (AF I) and right
(AF II) audio channel with peak hold
function
When the displays show full deflection,
the audio input level is excessively high.
When the transmitter is overmodulated
frequently or for extended periods of time,
the “PEAK” display is shown inverted. In
addition, the display backlighting changes
from orange to red and “AF PEAK” flashes in
alternation with the standard display.
Frequency bank and
channel
Current frequency bank and channel number
Frequency Current transmission frequency
Name Freely selectable name of the transmitter
Transmission icon RF signal is being transmitted
Transmission power Current transmission power
Input sensitivity Current input sensitivity for the audio signal available
at the audio input sockets BAL AF IN L(I)+Mono and
BAL AF IN R (II)
Lock mode icon Lock mode is activated (see page 18)
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
519.150
ew300IEM
B.Ch: 1. 1
Standard -18dB
MHz
햴
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
AF I
AF II