User guide

25
Changing the parameters of a device
The parameters that you can change depend on the respective device type.
Specific information on the parameters can be found in the user manuals
for the devices.
Click on the corresponding parameter.
The line for the parameter is highlighted in blue.
Click on “Set”.
A new window opens.
Enter the desired value.
Confirm with “OK”.
The window closes; the new parameter is displayed.
Then transmit the parameters as described in the user manual of the
NET 1.
Note:
The frequency of the device can only be changed when the channel
bank “U” is selected.
Line highlighted in Meaning
white y You can change these parameters.
y The data transmission to the devices was
successful.
yellow The parameter has been changed but not yet
transmitted to the devices.
blue You have clicked on a parameter highlighted in
white.