User guide

27
SKM 5200
Remove the power pack.
Slide the multi-function switch upwards (UP ) and keep it in this
position.
Reinsert the power pack.
The program does not launch
Check that your PC satisfies the system requirements (see “System
requirements” on page 4).
Check the settings of your firewall; the WSM may be blocked by a
setting.
The receiver panel does not appear
The firmware in the receiver has not yet been updated.
Update the firmware in the receiver (see “Updating the firmware of the
devices” on page 17).
If a problem occurs that cannot be solved with the proposed solutions:
y Register on the Sennheiser homepage at www.sennheiser.com/net1
and describe the problem in the “Support” section
or
y contact your local Sennheiser agent.
DOWN
UP
SET