Instruction manual ew 300-500 G4

Using the SKM 300 G4
113
Deactivating the RF signal (RF mute)
You can deactivate the RF signal in two ways:
Deactivating the RF signal with the MIC button
You can mute the RF signal by pressing the MIC button.
To do this, the MIC button function must be configured to RF On/Off. You
can find more information about this subject under “Advanced > Mute
Mode menu item”.
Furthermore, you can configure whether the MIC button should light up red
and when. You can find more information about this subject under “Ad-
vanced > MIC LED menu item”.
Deactivating the RF signal with the ON/OFF button
You can deactivate the RF signal with the ON/OFF button.
To deactivate the RF signal:
▷ Press the ON/OFF button.
RF Mute On? appears.
▷ Press the SET button.
The transmission frequency is displayed, however the wireless micro-
phone is not transmitting an RF signal. The transmission icon is not lit
(see “Displays on the SKM 300 G4 handheld transmitter display pan-
el”).
To activate the RF signal:
▷ Press the ON/OFF button.
RF Mute Off? appears.
▷ Press the SET button.
The transmission icon appears again (see “Displays on the