Instruction manual ew 300-500 G4

Installing the EM 300-500 G4

Creating a data network

You can monitor and control one or more EM 300-500 G4s via a network

connection using Sennheiser Wireless Systems Manager (WSM) soft-

ware.

Automatic frequency setup can also be performed over the network

without the WSM software. See “Easy Setup menu item”.

To connect the EM 300-500 G4 to a network:

▷ Connect a network cable with an RJ-45 connector (to the Ethernet

socket on the rear side of the EM 300-500 G4.

▷ Connect the other end of the network cable to a network switch.

►

For more information about controlling devices via the Sennheiser

Wireless Systems Manager (WSM) software, refer to the instruc-

tion manual for the software. You can download the software here: