Instruction manual ew 300-500 G4

Installing the ASA 214
61
Connecting/disconnecting the ASA 214 to/from the
power supply system
To supply power to the ASA 214, the connected receivers and any antenna
amplifiers used, you will need the NT 1-1 power supply unit.
Only use the supplied NT 1-1 power supply unit. It is designed for your an-
tenna splitter and ensures safe operation.
To connect the ASA 214 antenna splitter to the power supply system:
▷ Plug the hollow jack plug of the power supply unit into the DC IN socket
of the antenna splitter.
▷ Pass the cable of the power supply unit through the cable grip.
▷ Slide the supplied country adapter onto the power supply unit.
▷ Plug the power supply unit into the wall socket.
To completely disconnect the ASA 214 antenna splitter from the power
supply system:
▷ Unplug the power supply unit from the wall socket.
▷ Unplug the hollow jack plug of the power supply unit from the DC IN
socket of the antenna splitter.