Instruction manual ew 300-500 G4

Using the EM 300-500 G4

Using the headphone output

You can use the headphone output on the front of the EM 300-500 G4

(6.3 mm jack) to listen to the audio signal.

ATTENTION

Danger due to high volume levels

Volume levels that are too high may damage your hearing.

▷ Turn down the volume of the headphone output before you put on the

headphone.

▷ Increasing the volume of the audio output AF Out (see “AF Out menu

item”) to more than +18 dB also increases the volume of the headphone

output.

▷ Connect the headphone to the headphone socket.

▷ Control the volume by turning the volume control next to the head-

phone socket.