Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
35
Using the products
Activating/deactivating the MUTE switch of the transmitter
From the receiver, you can activate or deactivate the MUTE switch of the
received transmitter. This setting determines whether or not the transmitter
can be muted.
왘 Select System Settings – Mute Switch.
Adjusting the display brightness
The brightness of the receiver display panel can be adjusted in 16 steps.
왘 Select System Settings – Display Brightness.
Turning the jog dial by one notch increases or reduces the brightness by
5%. The brightness can be reduced to a minimum of 25%.
The brightness automatically dims after a few minutes.
Calling up help functions
For more information and help on the use and operation of your receiver or
your system, you can call up different help functions by
scanning the QR codes displayed on the receiver display panel or by following
the links given below.
왘 Select System Settings – Help.
왘 Select the desired help function.
Auto Lock
Mute Switch
Display Brightness
Off
Active
75
System
Exit
Setting Meaning
Active The MUTE switch of the transmitter is activated.
Depending on the position of the MUTE switch of the received
transmitter, either the icon for a muted transmitter ( ) or the
icon for an unmuted transmitter ( ) appears on the standard
display.
Deactivated The MUTE switch of the transmitter is deactivated. The follow-
ing icon appears on the standard display:
If the MUTE switch of the transmitter is actuated, Mute
disabled appears on the display panel of the receiver.
Auto Lock
Mute Switch
Display Brightness
Help
System Info
Off
Active
75
System
Mute Switch
Display Brightness
Help
System Info
Factory Reset
Active
75
System
Selection Help function QR code Link
Setup
Guide
You are redirected
to the page for
downloading the
setup guide.
sennheiser.com/D1-setup
Operation
Manual
You are redirected
to the page for
downloading this
system manual.
sennheiser.com/D1-manual
FAQ &
Support
You are redirected
to the FAQ/sup-
port page.
sennheiser.com/D1-support
Mobile
App
You are redirected
to the page for
downloading the
app for your
mobile device.
sennheiser.com/D1-app