Instruction manual ew D1
Table Of Contents
- Contents
- Important safety instructions
- Optimum sound the easy way
- Package contents
- Product overviews
- Putting the products into operation
- Avoiding sources of interference
- Direct line of sight recommended
- Putting the receiver into operation
- Fitting the device feet
- Mounting the rack mount “ears”
- Connecting the rod antennas to the receiver
- Mounting the receiver into a 19" rack
- Mounting a single receiver into a rack
- Mounting the rod antennas to the front of the rack
- Mounting two receivers into a rack
- Connecting the receiver to a mixing console
- Connecting receivers in a network
- Connecting the receiver to the power supply system
- Putting the bodypack transmitter into operation
- Preparing the headset microphone for use
- Attaching the clip-on microphone to clothing
- Putting the handheld transmitter into operation
- Recharging the accupack
- Using the products
- Switching the devices on or off
- Checking the charge status of the batteries or accupacks
- Checking the RF signal level
- Muting the bodypack transmitter or the SKM-S D1 handheld transmitter
- Pairing a receiver with a transmitter
- Identifying paired devices
- Using the devices in multi-channel operation
- Switching between the standard display and the extended standard display
- Using the operating menu of the receiver
- Using the buttons for navigation
- Overview of the operating menu of the receiver
- Changing the name of the radio link
- Activating/deactivating the low-cut filter
- Adjusting the equalizer
- Adjusting the de-esser
- Activating/deactivating the dynamic compression
- Resetting the audio settings
- Coarsely adjusting the output level of the receiver (Mic/Line)
- Fine-tuning the output level of the receiver
- Activating/deactivating the lock mode
- Activating/deactivating the MUTE switch of the transmitter
- Adjusting the display brightness
- Calling up help functions
- Retrieving system information
- Resetting the receiver to the factory default settings
- Changing the network configuration
- Displaying the IPv6 address
- Displaying the MAC address
- Performing a walk test (checking the reception quality)
- Controlling, monitoring or updating devices via the network
- Cleaning and maintaining the products
- If a problem occurs ...
- Specifications
- Accessories
- Manufacturer Declarations
52
Specifications
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
GNU GPL version 2
To obtain the source code of software components licensed under the GPL v2,
please submit a written request to us. Our contact data can be found on the
back page of the Specifications booklet.
Ubuntu Font License
Version 1.0
Preamble
This license allows the licensed fonts to be used, studied, modified and redis-
tributed freely. The fonts, including any derivative works, can be bundled,
embedded, and redistributed provided the terms of this license are met. The
fonts and derivatives, however, cannot be released under any other license.
The requirement for fonts to remain under this license does not require any
document created using the fonts or their derivatives to be published under
this license, as long as the primary purpose of the document is not to be a
vehicle for the distribution of the fonts.
Permission & Conditions
This license does not grant any rights under trademark law and all such rights
are reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy
of the Font Software, to propagate the Font Software, subject to the below
conditions:
1. Each copy of the Font Software must contain the above copyright notice
and this license. These can be included either as stand-alone text files,
human-readable headers or in the appropriate machine-readable meta-
data fields within text or binary files as long as those fields can be easily
viewed by the user.
2.
The font name complies with the following:
1. The Original Version must retain its name, unmodified.
2. Modified Versions which are Substantially Changed must be renamed
to avoid use of the name of the Original Version or similar names
entirely.
3. Modified Versions which are not Substantially Changed must be
renamed to both
1. retain the name of the Original Version and
2. add additional naming elements to distinguish the Modified Version
from the Original Version. The name of such Modified Versions must
be the name of the Original Version, with “derivative X” where X rep-
resents the name of the new work, appended to that name.
3. The name(s) of the Copyright Holder(s) and any contributor to the Font
Software shall not be used to promote, endorse or advertise any Modified
Version, except
1. as required by this license,
2. to acknowledge the contribution(s) of the Copyright Holder(s) or
3. with their explicit written permission.