Safety instructions ew D1
2
Important safety instructions
Repairs
There are no user serviceable parts inside your products. Always refer repairs to your authorized Senn-
heiser service partner.
Risk of fire due to overloading
Do not overload wall outlets and extension cables as this may result in fire and electric shock.
Danger of hearing damage due to high volumes
If the products are used commercially, their use is subject to the rules and regulations of the trade asso-
ciation responsible. Sennheiser, as the manufacturer, is therefore obliged to expressly point out possi-
ble health risks arising from use.
These products are capable of producing sound pressure levels exceeding 85 dB(A). This is the sound
pressure corresponding to the maximum permissible volume which is by law (in some countries) allo-
wed to affect your hearing for the duration of a working day. It is used as a basis according to the spe-
cifications of industrial medicine. Higher volumes or longer durations can damage your hearing. At
higher volumes, the duration must be shortened in order to prevent hearing damage. The following are
sure signs that you have been subjected to excessive noise for too long a time:
• You can hear ringing or whistling sounds in your ears.
• You have the impression (even for a short time only) that you can no longer hear high notes.
Intended use
Intended use includes:
• having read and understood the instruction manuals of the products and especially this safety
guide,
• using the products within the operating conditions and limitations described in the instruction
manuals and in this safety guide.
“Improper use” means using the products other than as described in the instruction manuals and in this
safety guide, or under operating conditions which differ from those described herein.
The instruction manuals of your products and this safety guide are also availa-
ble at www.sennheiser.com.
Safety instructions for antennas
Use safety wires to protect the antennas against tipping/dropping. The safety wires, rope terminations
and coupling links must comply in their dimensioning and condition with the regulations and standards
of the country in which they are used!
www
Manual
SafetyGuide_554647_0714_SP11.book Seite 2 Dienstag, 15. Juli 2014 5:33 17