User Manual

Putting the products into operation

Putting the bodypack transmitter into operation

Removing/inserting the batteries or the optional accupack

You can power the bodypack transmitter with the supplied B 30 battery box

and two 1.5 V AA size batteries.

If you use the supplied B 30 battery box to power the bodypack transmitter:

왘 Insert the batteries into the B 30 battery box.

Please observe correct polarity when inserting the batteries.

To remove the battery box or the accupack:

왘 Simultaneously press the two catches and pull the battery box or the accu-

pack away from the bodypack transmitter.

To insert the battery box or the accupack:

왘 Slide the battery box or the accupack onto the bodypack transmitter as

shown.

The battery box or the accupack locks into place with an audible click.

Attaching the bodypack transmitter to clothing

You can use the belt clip to attach the bodypack transmitter to clothing (e.g.

belt, waistband).

Connecting the clip-on microphone or the headset microphone to the

bodypack transmitter

Only connect the clip-on microphone or the headset microphone recom-

mended by Sennheiser. These microphones are optimized for the bodypack

transmitter.

왘 Connect the jack plug of the clip-on microphone or the headset microphone

to the 3.5 mm jack socket (Mic/Line) of the bodypack transmitter.

왘 Lock the jack plug by screwing down the coupling ring.

Optionally, you can also use the Sennheiser BA 30 accupack (3.6 V). The

accupack must be charged before first time use. The accupack can

remain in the bodypack transmitter for charging.