Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX EM 2 rack receiver
120
Ch 1 / Ch 2 -> LED menu item
The LED menu item allows you to set the behavior of the LINK
LED on the received transmitter.
• Setting range:
• ON: The LINK LED remains continuously lit.
• OFF: The LINK LED switches off while the lock-off func-
tion is active.
For this to occur, the automatic lock-off function must be
enabled in the Auto Lock menu item (see „Ch 1 / Ch 2 ->
Auto Lock menu item“).
To open the LED menu item:
▷ In the menu, navigate to the LED menu item for the desired
channel.
▷ Press the jog dial to open the menu.
The following view is displayed:
▷ Turn the jog dial to set the desired value.
▷ Press the jog dial to save your setting.
or
▷ Press the ESC button to cancel the entry without saving the
setting.
For the set value to be applied to the received transmitter,
you must synchronize the channel („Connecting to the
EW-DX EM 2 receiver / synchronizing the EW-DX EM 2“).